VERMONT — The median residential sale price for a house in Franklin County hit almost $400,000 in March.
Does anybody expect the cost to go down? Not really.
Will the General Assembly pass a policy to reshuffle the housing market? Not this year.
But work continues nonetheless. In 2025 so far, Vermont logged 30 new addresses built in Franklin County.
“I’m amazed that we’re as busy as we are with the price of everything,” architect Laz Scangas said. “Since COVID, the price has gone through the roof. I’m amazed that people are still building because it’s so expensive.”
So what’s their secret?
Vermont’s landscape often seems custom-made for architects.
Green mountain backdrops and white cloud cover expanses make most building silhouettes stand stark against the landscape. Both picturesque cabins and stately manors greet drivers wandering over the state’s country roads, and driving down to Starksboro last week, I’m sure I got a few glimpses of buildings constructed by Vermont Frames.
I had asked the business’ owner Kevin Moyer to give me a rundown on structural insulated panels, or SIPs.
Normally, trying to convince anyone to use materials outside of what’s typically seen on a job-site can be a tough sell, and SIPs use foam.
At Vermont Frames & Foam Laminates, Moyer showed how they put the materials together, pointing out how glue rollers apply even sheets of adhesive to sandwich a four-inch thick piece of foam between two specially-treated pieces of exterior plywood.
Builders then apply the panels as “Lego” pieces, Moyer said, stacking and aligning the various grooves between the panels to create a tight fit.
While the panels themselves can be used as structural components, bigger builds rely on interior framing put together by experts at Vermont Frames. Due to the approach, houses erected by the company have the framing exposed on the interior, with panels effectively acting as the building’s thermally-insulated outer skin.
New houses, however, are not cheap.
Moyer said his typical clients have been planning for a new build for a while, and they’ve done their research about what kind of house they’d like, so they’re ready to move forward with something more substantial.
New builds can easily fall into the over $500,000 range.
Moyer, however, sees the potential for a cheaper option, especially if Vermont Frames can find ways to do repeatable work around SIPs. Vermont Frames currently specializes in highly-efficient custom-builds, but Moyer said using SIPs makes construction go faster, often cutting months from build times due to all the necessary planning.
If they could set up a space to create repeatable standardized SIPs on standardized home builds, Vermont Frames could potentially pass those savings along to consumers.
Just last week, Moyer rolled out a new product meant to explore this approach. The new “Irish Hill” house is effectively a box made of SIPs streamlined to keep costs down. Vermont Frames puts the starting price tag at $63,000 for the building, although buyers would still need to acquire the land and finish the building.
Even so, he said he’s gotten some interest, with organizations like Habitat for Humanity seeing the potential to roll-out larger-scale developments at cost.
Up in Highgate, D&H Housing has a similar idea for its pre-fabricated units. Owner Brendan Deso said the company gets prefabricated homes from a manufacturer in Pennsylvania, who sends it up after the order is placed.
“They're wasting as little material as possible because it’s a factory. Inside is a controlled environment, and they’re building it as quickly as possible,” Deso said. “The setup is so streamlined by the time it gets to me, my contractors are in and out in two weeks. They’re built in a way that minimizes the work that has to be done on sight.”
As a manufacturer, they’re also able to find cheaper materials, fixtures and appliances by buying in bulk.
To improve the local housing situation, Deso has focused his efforts on preparing lots while avoiding Act 250 stipulations and bringing in manufactured houses to sit on the newly-divided property. Most of his clients are people looking to downsize, relocate to Vermont or buy their first homes, he said.
“It’s part of the puzzle, he said. “For a lot of these folks, who have a retirement account with an employer, it’s the only opportunity they have in their lifetime to make any serious wealth they can transfer generationally.”
Costs for new buildings can still be prohibitive, however, with price-tags hovering around $300,000.
Deso said he’ll see additional cost-savings if Vermont can figure out changes to Act 250 that could spur new development. He actively avoids triggering the land use law with his work as the extra permitting required can slow down builds.
“There are a million different ways for a developer to be tied up,” he said. “You can’t go from surviving on a system with a population decreasing everywhere and go to an inverted situation and not enact sweeping policy changes.”
Deso said he ended up holding off on a large-scale development in at least one situation because of state and federal restrictions around wetlands, which continue to tie up the project’s future.
If he and other developers can’t add stock as a result of such regulations, then Deso said it’s going to be difficult to keep costs down. Rental prices in St. Albans have already ballooned past Montreal’s in some cases, with no signs of stopping anytime soon.
“Some of it is the cost of the land. If there’s more inventory, it would lower the price, but (the cost) hits you every step of the way. Last time I checked, there’s not a line of people trying to get into general contracting,” Deso said.
When I asked local architect Laz Scangas if he had any ideas for Vermont’s housing solution, he kicked that can, understandably. He’s been in the business long enough to watch demands shift and change with the times, and the pace is faster than it's ever been.
“I would go to a site once a week, and we’d solve problems, then the fax machine came,” he said. “Now with a cell they take a picture, send it to you, and they’ve got five guys waiting for an answer.”
New materials and methods could be a way forward, but there are additional challenges there. Moyer recognized training people to install SIPs isn’t difficult, but the standard residential construction method has been “stick-built” framing for so long that it’s hard to find people willing to try something different.
“A lot of new products come out that haven’t been time tested,” Scangas said. “Do you put it on the building and everyone believes what you say, or is it going to fail? New products are coming out everyday.”
Instead, Scangas highlighted the need for workers. Few people stay on a job for more than a week, he said. Both Deso and Moyer also identified a lack of skilled construction workers as a major issue for the housing industry.
“I don’t think costs are going to come down,” Scangas said.
That doesn’t mean that houses can’t be built for cheaper. There’s plenty of historical precedent.
Vermont’s first cabins were constructed with wood clear-cut from the land, hand-hewn and hammered together with square nails made with iron smelted in Sheldon. Houses were often shoddily-made, drafty and cold — with no electricity, or heating outside of a Franklin stove — but they were cheap.
Now, most lumber needs to be imported. Most materials are only available outside the state, and some specialty items require an international supplier. As a result, the standard house is dry, energy-efficient and built-to-last. They have lights, running water, likely Internet connectivity, heat and even future market value.
But they sure aren’t cheap.
“Back then, it’s not as rushed. Things took time,” Scangas said. “Nowadays, a client calls, they’ve got this project that needs to start tomorrow.”
Trade-offs.
Comments
No comments on this item Please log in to comment by clicking here